The build in photos
1 photo in this chapter
2021 Jeep Gladiator
Jeep Gladiator Shop Build - Whistler
Build managed by American Adventure LabEvery build has a story.
Keep Up With This Build
Published progress, right in your Following feed.
Build timeline
One build. Every chapter.
Undated history · Shown in saved phase order. Original event dates are not available.
- 01
- 02
A Gladiator That Changes With the Job
Whistler is our 2021 Jeep Gladiator Rubicon EcoDiesel, used for shop work, overland travel, and product development. Its bed layout has changed as we have tested storage, mounting, and enclosure ideas. The photos document those different stages: an open rack carrying camp equipment, drawers and slides extending over the tailgate, and the Load-Bearing Enclosure (LBE) with exterior accessory mounts. Use them to compare layouts and access, then check the current components for your own truck. Vehicle: 2021 Jeep Gladiator Rubicon JT Powertrain: 3.0L EcoDiesel, 8-speed automatic Bed Systems: Rack, modular storage, and LBE development Role: Shop truck and development vehicle Whistler, AAL’s EcoDiesel Gladiator shop build.
1 photo in this chapter
- 03
Compare the Open Rack and Enclosed Layouts
The earlier rack configuration carries equipment above the bed rails while leaving the load visible from the sides. Later photos show the LBE providing an enclosed upper storage area and mounting surfaces for accessories. Those arrangements serve different packing needs. Start with the items you carry most often and decide which need enclosed storage, which need quick access, and how much bed space you want available for hauling. Whistler’s gallery records several answers to that question over time. An earlier open-rack configuration with camp equipment packed above the bed rails. Whistler with the LBE open and the rear cargo system accessible.
2 photos in this chapter
Whistler Jeep Gladiator with Load-Bearing Enclosure open and rear cargo drawers extended - 04
Build the LBE From the Bed Rails Up
The Gladiator Load-Bearing Enclosure mounts through AAL’s Bed Rail Attachment System. Install that rail system first, following the current instructions. The enclosure uses 3mm aluminum panels with steel supports, locking latches, and seals designed for weather protection. Its gas struts hold the opening panel up for access. The photo shows how the open enclosure and the equipment below it share the rear working area. Plan the complete combination before ordering. Bed racks, side MOLLE panels, and rooftop-tent brackets are configuration options on the current bundle page.
0 photos in this chapter
No photos in this chapter yet.
- 05
Bring the Bed Storage Into Reach
The development photos show red Milwaukee Packout cases, metal storage drawers, and sliding trays extending toward the open tailgate. The open rear view makes it easier to see what can be reached without climbing into the bed. Plan around that access when choosing a layout. Check the travel of each drawer and slide, the tailgate’s opening path, and the equipment you need first at a stop. Fridge handles, lids, wiring, and ventilation also need room around them. The gallery includes prototypes and earlier parts. Confirm the current product dimensions and mounting combination before reproducing a photographed setup. Drawers and slides extended over the tailgate during development of the bed layout. Recovery equipment mounted along the LBE’s side panel in an earlier photographed configuration.
2 photos in this chapter
- 06
Use the Outside for Equipment You Need to Reach
The LBE photos show equipment mounted along its sides, including recovery tools and a first-aid kit. Exterior mounting gives those items their own locations while keeping the enclosed storage available for other gear. Choose mounts for the specific item and panel, then check clearances around doors, the tailgate, and nearby accessories. If you are adding a tent, confirm its mounting pattern against the LBE Rooftop Tent Brackets. The slotted brackets are not compatible with every tent.
0 photos in this chapter
No photos in this chapter yet.
- 07
See the Load-Bearing Enclosure
This short AAL product overview shows the enclosure and its construction. It complements the build photos without turning this page into an installation guide. For another view of the equipped truck, watch the Gladiator LBE visual tour.
0 photos in this chapter
No photos in this chapter yet.
- 08
A Different Gladiator, a Different Job
AAL’s four e-bike transport clip documents a customer Gladiator using an LBE and 12-inch bed rack. It is a separate build, offered here as an example of another layout. Confirm your rack, mounts, equipment weight, and vehicle limits for the load you plan to carry.
0 photos in this chapter
No photos in this chapter yet.
- 09
Recorded Build Specifications
0 photos in this chapter
No photos in this chapter yet.
- 10
Vehicle
Platform: Jeep Gladiator JT Trim: Rubicon Engine: 3.0L EcoDiesel Turbo Transmission: 8-speed automatic Driveshafts: JE Reel
0 photos in this chapter
No photos in this chapter yet.
- 11
Suspension
Lift: Teraflex Long Arm Shocks: Falcon 3.3 Springs: Teraflex Overland Rear Springs
0 photos in this chapter
No photos in this chapter yet.
- 12
Wheels and Tires
Tires: Nitto Ridge Grappler Size: 38x12.5R17 Wheels: Teraflex Nomad Offset: -12mm
0 photos in this chapter
No photos in this chapter yet.
- 13
Build Priorities
Lightweight components Modular, organized storage Long-distance travel and exploration Easy conversion back to an open truck bed
0 photos in this chapter
No photos in this chapter yet.
- 14
Questions About Whistler’s Bed Setup
0 photos in this chapter
No photos in this chapter yet.
- 15
What Does LBE Stand For?
Load-Bearing Enclosure, AAL’s bed enclosure for the Jeep Gladiator JT.
0 photos in this chapter
No photos in this chapter yet.
- 16
Do I Need the Bed Rail Attachment System?
Yes. The LBE instructions require the JT Bed Rail Attachment System to be installed first. Follow the current installation guide and have a second person available for the enclosure installation.
0 photos in this chapter
No photos in this chapter yet.
- 17
Do All the Photos Show the Same Configuration?
No. Whistler is a development vehicle. The galleries include an open rack, enclosed layouts, and prototype storage components from different stages.
0 photos in this chapter
No photos in this chapter yet.
- 18
Are the Pictured Accessories Included With the LBE?
Check the selected bundle contents. Racks, MOLLE panels, tent brackets, and the equipment attached to them are separate configuration choices.
0 photos in this chapter
No photos in this chapter yet.
- 19
Can You Help Plan a Similar Gladiator?
Use the questions button above the main photo. Include your model year, bed layout, fridge dimensions, equipment list, and whether you need space for a tent, bikes, or regular hauling.
0 photos in this chapter
No photos in this chapter yet.
- 20
Bed Storage and Development Gallery
These photos document the open-rack and storage-development stages.
21 photos in this chapter
- 21
Whistler Build Archive
Exterior, LBE, interior, and trail photos from multiple stages of the build.
33 photos in this chapter
- 22
Products listed by AAL
Published equipment references from the original build page. This is not an invoice or a current parts estimate. 25' Rear Wiring Kit BASE 6" Storage Drawer BASE Fridge Slide BASE Slightly Wider Slider BASE Slightly Wider Slider Handle DeWalt Wall Charger Mounting Bracket Dometic CFX5 55IM Electric Cooler End Caps for Jeep Wrangler JL/JT/JK Modular Front Bumper ICOM 5100 Mounting Kit Jeep Gladiator L-Track Bed Kit Jeep Gladiator Load-Bearing Enclosure Bundle Jeep Gladiator Quick-Release Rear Inner Fenders Jeep JL - JT Overhead MOLLE Shelf Jeep JL-JT MOLLE Door Panels Jeep JL/JT Battery Cutoff Switch Mount Jeep JL/JT Bracket for ARB Dual Compressor Fuse - Engine Bay Jeep JL/JT Cowl Accessory Brackets Jeep JL/JT Fender Retention Hardware Jeep JL/JT Front MOLLE Door Panels Jeep JL/JT Next-Gen High-Lines - Fender Chop Brace with Daytime Running Lights Jeep JL/JT Quick-Release Front Inner Fenders Jeep JL/JT Rear MOLLE Door Panels Jeep JL/JT/JK Windshield Decal Jeep JT - Bed Rail Attachment System Jeep JT Aluminum Bed Rack 12" (Half Height) Jeep JT Gladiator Aluminum Bed MOLLE Panels Jeep JT Gladiator Aluminum Front Bed MOLLE Panel Jeep JT Gladiator Back Seat Dual ARB Compressor Mount Jeep JT Gladiator Rear Seat ARB Compressor Bracket Jeep JT Gladiator Rear Seat Delete Bundle (OEM Sub/Backwall Compatible) Jeep JT Inner Fender and High-Line Light Bundle Jeep JT LBE Side MOLLE - Long Jeep JT LBE Side MOLLE - Short Jeep JT Load Bearing Enclosure Jeep Wrangler JL/JT Gladiator A-Pillar Light and Antenna Brackets Jeep Wrangler JL/JT Modular Front Bumper Package Jeep Wrangler JLU and Jeep Gladiator JT Rear Overhead MOLLE Panel JL Modular Front Bumper - Lower Splash Guard JL/JT Front Seat Back Molle Panels JT BASE - Bed Attachment System JT BASE - Wider Slider Spacer Kit JT Rear Seat Compressor Bracket Connection Kit Light Pod Brackets for Wrangler/Gladiator Modular Front Bumper (Pair) Sleeper Keeper - Large Tent Mount Sleeper Keeper - Large Tent Mount Starlink Mini Overhead MOLLE Mount Universal NATO Jerry Can Mount Universal Paper Towel Holder
0 photos in this chapter
No photos in this chapter yet.
Build discussion 0
Public discussion. Comments and tags are visible to everyone while this build is published.
Loading discussion…