The build in photos
1 photo in this chapter
2022 Jeep Wrangler
Shop 392 Build
Build managed by American Adventure LabEvery build has a story.
Keep Up With This Build
Published progress, right in your Following feed.
Build timeline
One build. Every chapter.
Undated history · Shown in saved phase order. Original event dates are not available.
- 01
Shop Jeep Wrangler 392 cargo system set up at camp - 02
The Gobi 392, With Systems Built Around the Cargo
This AAL shop build is a 2022 Jeep Wrangler Rubicon 392 in Gobi. Its equipment record combines a MASS cargo layout, rear seat deletes, auxiliary power, on-board air, recovery equipment, and communications. The photos show how those systems share the Jeep’s space: the fridge and drawers at the tailgate, electrical equipment beneath the cargo floor, and gear mounted around the spare tire and inside the cabin. The gallery includes different stages of the build. This shop Jeep also serves as a platform for testing and prototyping AAL products through use on the trail and at camp. The earlier build record lists Teraflex Olympus beadlock wheels, 38x13.5R17 Nitto Trail Grappler tires, and 4.88 gearing by Revolution Gear. Those specifications document a stage of this build, rather than a requirement for every 392 setup. Vehicle: 2022 Wrangler Rubicon 392, Gobi Recorded Suspension: Teraflex 4.5-inch long-arm kit Recorded Tires: 38-inch Nitto Trail Grapplers Cargo: MASS Plus, drawers, slides, and rear seat deletes The Gobi shop 392 in a photographed exterior configuration.
1 photo in this chapter
- 03
Where the Build Started
Before the trail miles and later upgrades, we packed six boxes of AAL gear and headed to La Porte, Indiana, to pick up the Gobi 392 and install its MASS cargo system. ▶ Play: New Shop Build - JL 392!!! (7:17) Watch on YouTube
0 photos in this chapter
No photos in this chapter yet.
- 04
Make the Rear Opening a Working Area
The recorded cargo system uses a MASS Plus platform with a Flip’n Slide, two 6-inch drawers, one 4-inch drawer, an Ultralight Flat Slide, and an upper cargo shelf. The original equipment list names a Dometic CFX3 45 fridge. The camp photos show the slide and work surfaces extending beside the open tailgate. The JL VersaTable adds a separate surface at the tailgate. Compare the full layout with your fridge dimensions and allow room to stand, open lids, and reach drawers. The Gobi 392’s cargo slides and tailgate table set up for food preparation at camp. Cargo equipment mounted in the rear cabin, viewed through an open rear door.
2 photos in this chapter
- 05
Use the Rear Cabin as Part of the Cargo Plan
The equipment list includes both 40% and 60% rear seat deletes, along with seat-back, side, door, and overhead MOLLE panels. The photos show mounting space and cargo equipment behind the front seats. That configuration exchanges rear passenger seating for cargo space. Decide which seats you need before choosing components, and confirm that the exact seat-delete and door-panel combination will fit together. The gallery contains multiple stages, so each photo should be checked against the parts you plan to use.
0 photos in this chapter
No photos in this chapter yet.
- 06
Keep the Electrical Equipment Accessible
The original record names a REDARC Manager 30 with color display, a 1000W inverter, and two EcoWorthy 30Ah batteries. A cargo battery bracket, fuse holder, cutoff switch, and wiring work are also listed. The installation photos show electrical equipment beneath the cargo area and access through the platform. Plan charging, circuit protection, cable routing, and service access together. The recorded battery sizes describe this build; they do not establish runtime for your own equipment. Electrical components beneath the cargo floor during installation. Recovery and storage equipment mounted around the rear spare tire.
2 photos in this chapter
- 07
Give Air and Recovery Gear Dedicated Locations
The recorded on-board air system uses a dual ARB compressor with ARB Pressure Control, an under-seat bracket, and a driver-side connection kit. The exterior photos show separate recovery-equipment mounts around the spare tire. The parts list includes a Spare Tire Platform, Packout adapter, Tracks Rack, MAXTRAX boards, and a first-aid kit. Those choices provide a layout reference for equipment you want to reach from outside. Check the current mounts and clearances for your spare wheel, tire, and tailgate.
0 photos in this chapter
No photos in this chapter yet.
- 08
Original Equipment and Value Record
The original page included a parts, labor, and vehicle-value worksheet. It is preserved below as a historical record. These amounts are not current product prices, a present vehicle valuation, or a quote for a new build. Open the Original Build WorksheetRecorded ItemOriginal Listed Value 2022 Jeep Wrangler 392 Gobi$85,000.00 Teraflex Long Arm Kit - 4.5"$5,996.99 Long Arm Kit Install Labor$2,800.00 38" Nitto Trail Grapplers (qty 5)$2,940.00 Teraflex Olympus Beadlocks (qty 5)$2,799.95 Custom Powder on Wheels$500.00 ARB Classic Stubby Front Bumper$763.00 Warn Zeon 10S Winch$1,823.52 Factor 55 Flatlink$280.00 Magnaflow Rock Crawler Exhaust$1,599.00 RuggedRidge Rear Bumper$650.00 Teraflex Tailgate Reinforcement$1,293.99 Icom 5100 Comms Radio$480.00 Wolfbox Rear View Monitor$260.00 REDARC Manager 30 with Color Display$1,752.00 REDARC 1000W Inverter$460.00 MBQuart Full Audio System (incl sub)$2,198.99 MBQuart Rear Audio System$719.00 EcoWorthy 30Ah Batteries (qty 2)$216.00 ARB Dual Compressor$616.00 ARB Pressure Control System$237.00 MAXTRAX MKII Traction Boards$329.99 Milwaukee Packout First Aid Kit$79.97 Milwaukee Axe$46.97 Bully Tools Shovel$45.00 Grip Fist Clamps$11.00 Rotopax 2 Gal Water Can$56.95 Rotopax Can Mount$49.99 Dometic CFX3 45$949.99 Stinger Circuilt Breaker for Winch$54.95 AAL Products Front Inner Fenders$419.00 Rear Inner Fenders$400.00 High-Line Lights$355.00 Front MOLLE Door Panels$144.95 Rear MOLLE Door Panels$134.95 Seat Back MOLLE Panels$114.95 Rear Side MOLLE Panels (w/ Sub) - (Driver and Passenger)$180.00 Overhead MOLLE Panel$329.95 Cowl Attachment System$67.85 Rear Fire Extinguisher Mounts (qty 2)$99.90 JL MASS+ Platform$695.95 JL Rear Seat Delete - 60%$400.00 JL Rear Seat Delete - 40%$300.00 Flip'n Slide$1,200.00 6" Drawer (qty 2)$659.95 4" Drawer$709.00 Ultralight Flat Slide$309.95 VersaTable with Switches$579.95 JL MASS Cargo Shelf$529.95 Milwaukee Packout Adapter$75.95 Surecan 2Gal Water Can and Mount$84.92 Spare Tire Platform w/ Accessory Brackets$623.95 Milwaukee Packout Adapter for STP$39.95 Tracks Rack$214.95 Jeep JL 392 Rear Cargo Battery Bracket$75.00 JL Under Seat Compressor Brkt$150.00 Driver's Side Connection Kit for Compressor$65.00 ARB Pressure Control Bracket$19.95 Icom 5100 Ram Mount Adapter$29.95 Mega Fuse Holder$26.90 Battery Cutoff Switch$73.94 Auxiliary Wiring and Rear Audio Labor$2,500.00 MBQuart Audio Installation Labor$1,200.00 AAL Product Install (all)$2,000.00 Total$129,822.01
0 photos in this chapter
No photos in this chapter yet.
- 09
Questions About the Gobi Shop 392
0 photos in this chapter
No photos in this chapter yet.
- 10
Which Wrangler Is This?
The original worksheet identifies a 2022 Wrangler 392 in Gobi. Choose components for your exact Wrangler model and year.
0 photos in this chapter
No photos in this chapter yet.
- 11
Does This Cargo Layout Keep the Rear Seats?
The recorded configuration includes both rear seat-delete sections. Plan around your passenger needs before reproducing the layout.
0 photos in this chapter
No photos in this chapter yet.
- 12
Are the Listed Values Current Prices?
No. They are the values published with the original build worksheet. Refer to current product pages or ask AAL for a quote for your project.
0 photos in this chapter
No photos in this chapter yet.
- 13
Do All the Photos Show One Unchanged Setup?
No. The gallery includes different installation, camp, and exterior configurations. Confirm product versions and mounting combinations for your own build.
0 photos in this chapter
No photos in this chapter yet.
- 14
What Should I Send When Asking About a Similar 392?
Use the questions button above the main photo. Include your model year, fridge dimensions, seating needs, power requirements, and the equipment you want to mount.
0 photos in this chapter
No photos in this chapter yet.
- 15
Gobi Shop 392 Build Photo Gallery
The combined gallery preserves the earlier shop build photos alongside later installation, exterior, and camp configurations.
113 photos in this chapter
- 16
Products listed by AAL
Published equipment references from the original build page. This is not an invoice or a current parts estimate. 392 Dual Type B Battery Bracket 6" M.A.S.S. Duo Drawer (6x3) End Caps for Jeep Wrangler JL/JT/JK Modular Front Bumper Fairlead Light Mount - Modular Front Bumper Flat Slide - 6x3 Flip'n Slide! (6x4) Flip'n Slide! (6x4) Jeep 392 Auxiliary Power System Jeep JL - JT Overhead MOLLE Shelf Jeep JL (Diesel/392) Cowl Maxi Fuse Mount Jeep JL (Diesel/392) Cowl Maxi Fuse Mount Kit Jeep JL 392 Wrangler Cargo Battery Hold Down Bracket Jeep JL Inner Fender and High-Line Light Bundle Jeep JL M.A.S.S. Plus Storage Platform Jeep JL Quick-Release Rear Inner Fenders Jeep JL Rear Seat Delete - 40% Jeep JL Rear Seat Delete - 60% Jeep JL Rear Seat Delete - Low Profile Driver Jeep JL Rear Seat Delete - Low Profile Passenger Jeep JL Rear Seat Delete-Low Profile Jeep JL-JT Front MOLLE Door Pockets Jeep JL-JT MOLLE Door Panels Jeep JL/JT High-Line Fender Brace with Daytime Running Lights Jeep JL/JT Next-Gen High-Lines - Fender Chop Brace with Daytime Running Lights Jeep JL/JT Quick-Release Front Inner Fenders Jeep JL/JT Rear MOLLE Door Panels Jeep JLU C-Pillar Fire Extinguisher Mount Jeep JLU M.A.S.S. Cargo Shelf - Adjustable Height Jeep JT Inner Fender and High-Line Light Bundle Jeep Wrangler 392 / Mojave / 2026 Rubicon A-Pillar Light Brackets Jeep Wrangler 392 Cargo Electrical Tray Jeep Wrangler JL/JT Modular Front Bumper Package Jeep Wrangler JL/JT Modular Front Winch Mount Jeep Wrangler JLU and Jeep Gladiator JT Rear Overhead MOLLE Panel Jeep Wrangler JLU Apex CRS Fixed Mount - Offset C-Pillar Jeep Wrangler JLU Rear Seat Delete JL Modular Front Bumper - Lower Splash Guard Light Pod Brackets for Wrangler/Gladiator Modular Front Bumper (Pair) M.A.S.S. Spare Tire Platform (STP) M.A.S.S. Spare Tire Platform (STP) M.A.S.S. Storage Drawer - 3 Inch (6x3 Pattern) M.A.S.S. Storage Drawer - 4 Inch (6x3 Pattern) M.A.S.S. Storage Drawer - 6 Inch (5x3 Pattern) MAXTRAX and ROTOPAX Mounting Brackets for STP MOLLE Bulkhead for JLU MASS Cargo Shelf
0 photos in this chapter
No photos in this chapter yet.
Build discussion 0
Public discussion. Comments and tags are visible to everyone while this build is published.
Loading discussion…